IN
UAE
Fast Drying Enamel Black
Industrial Fast drying enamel black.
Recommended use
On metallic surfaces, especially suited for heavy equipments, vehicle etc, especially for defense purpose.
Properties
Colour : Special colors available on request.
Finish : Smooth and glossy
Volume Solid: 35 ± 2 %
Viscocity: 200 ± 15 secs in ford cup no. 4. @ 30ºc
S.G. Kg/l: 1.05
Theoritical coverage rate: 10 – 12m²/ ltr
Recommended (D.F.T.) Microns 30
Recommended (W.F.T.) Microns 90
Stoving schedule: 120ºc for 30 minutes
Conical Mandral bend Test: 10 mm diameter with180º mandrel using – no sign of crack.
Adhesion / Hardness: Pendulum hardness Rockers with al load of 1000 grams from the height 200 mm – 1000 mm , 20 mm impactor – passes.
Scratch Tester: Test are conducted either on a go / no go basis using a single specified or by increasing load 100 grams to 2000 grams – passes.
Cross Hatch cutter : 2 mm spaces between cutting edges – passes
Pencil Hardness : B , HB etc. - passes
Corrosion Test : Minimum 500 hrs temperature is adjustable(Salt spray cabinet)from ambient to 35 º C for steady state control – passes.
Humidity Test : Very high humidities ( › 95% RH ) at user adjustable temperatures. ( up to 55 º C ) – passes.
Lubricant Test : Painted metal panels dipped in to HSD oil in oven and maintained the temperature up to 40 to 60 º C for 72 to 96 hrs –passes.
