Gulf tex – heavy texture is water borne acrylic heavily textured coating based on modified styrene emulsion with aggregates ( Mica chips), which provide special pattern on the wall, woods suited for the all climatic condition.
Colour : As per shade card
Finish : Texture finish
Solids: 65 % ± 3 %
Specific gravity: 1.70 ± 0.05
Theoretical Coverage 1 -2 m2/ltr
To handle: 4 hours
To Recoat: overnight
Number of coats: 1
Application by: Roller for heavy tex or Hooper spray
Used for interior and exterior surfaces such as plaster, dry walls, concrete, steel and wood. The extra thickness and flexibility allows small cracks and other surface imperfections to be hidden.
Surface should be clean and dry, before the application of Décor Flex. For the fresh concrete apply one coat of Tex primer and the apply heavy tex.
Surface must be clean and free of chalk, dust, and other contaminants. Clear the surface with wire brush, remove any loose adherence
Keep from freezing, contains water. Using at temperatures above 4 °c may cause eye, nose, and throat and skin irritation. Keep out of the reach of children
Metal drums one US gallon, 5 US gallons
Eaque ipsa quae ab illo inventore veritatis et quasi architecto beatae vitae dicta sunt explicabo.