Tollens Tex primer is an acrylic co-polymer primer with very fine aggregates, specially designed for priming masonry surfaces for all water based textured paints
Colour : White
Solids: 45% +/- 2%
Theoretical Coverage 9 -10 m2
Recommended film thickness: dry 30u wet 80u
To touch: 1 hour
To Recoat: Min. 5 hours
Vehicle type: acrylic co-polymer
Specific gravity: 1.55
It may be applied to stucco, concrete, plaster, drywall, brick and asbestos made surfaces
Tex Primer White may be thinned with water if necessary. Use at packaged consistency for most applications. Application method – Brush / Roller
Surface must be clean and free of grease, oil, chalk, dust, and other contaminants.
Keep from freezing, contains water .Use where application/drying Can proceed at temperature above 4 ° C May cause eye, nose, throat and skin irritation. Keep out of the reach of children
Metal drums one US gallon, 5 US gallons
Eaque ipsa quae ab illo inventore veritatis et quasi architecto beatae vitae dicta sunt explicabo.
Copyright ©2020 Regent - All rights reserved. Design By Technowebsy